Monogram Side-by-Side36" Uživatelský manuál stáhnout pdf

N.D. 2427 REF 01-08

ICE CLUMPED IN ICE BUCKET AND ON FREEZER FLOOR

GE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT FOR PUBLIC DISCLOSURE

GE Appliances

General Electric Company

Louisville, Kentucky 40225

GE Consumer & Industrial

Service Bulletin

JANUARY 2008

REFRIGERATORS REF 01-08

20' AND 22' BOTTOM FREEZERS

MODELS AFFECTED

Model Numbers: GBS20, GBS22, GDL20, GDL22,

GDS20, PDF22, PDS20, PDS22, PDW22, PFS22, SDL20

Serial Numbers: LG040000 to current production

Implementation in production: To Be Determined.

On the above mentioned 20' and 22' bottom freezer

refrigerators there have been consumer concerns

regarding clumped cubes in the ice bucket, an ice

sheet on the rear of the ice bucket or on the freezer

floor and, in some cases, ice forming on the freezer

drawer slides. In order to rectify this situation the fill

cup extension (Service Part Number WR29X10078)

should be installed.

Figure 1–Locking tab on fill cup

PROCEDURE FOR INSTALLATION OF FILL

CUP EXTENSION

1. Remove the fill cup, mounted to the rear of the ice

maker, by depressing the locking tab at the rear of

the icemaker mold body, lifting the fill cup up, away

from the icemaker.

Figure 2–Depress locking tab on fill cup

1 2 3 4 5 6 7 8 9

Shrnutí obsahu

Strany 1 - Service Bulletin

N.D. 2427 REF 01-08ICE CLUMPED IN ICE BUCKET AND ON FREEZER FLOORGE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT FOR PUBLIC DISCLOSUREGE AppliancesGen

Strany 2

N.D. 2427 REF 02-08EXCESSIVE DOOR PULL/GURGLING NOISE BACK PRESSURE DOOR RE-OPENING RESISTANCEGE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT FOR PUBL

Strany 3

Figure 3–Fill cup with extension installedFigure 5–Fill cup with extension installedFigure 4–Lift up the cup2. Attach the fill cup extension (service

Strany 4

N.D. 2427 REF 03-08CORRECT SERVICE MAIN BOARD FOR BOTTOM FREEZER MODELS WITH DOUBLE DRAWER MODELSGE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT FOR P

Strany 5

N.D. 2427 REF 04-08EVAPORATOR FAN NOISY, BLADE HITTING ORIFICE-MISALIGNED, EVAPORATOR FAN NORMAL NOISEGE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT

Strany 6

N.D. 2427 REF 05-08MONOGRAM® SABBATH KITGE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT FOR PUBLIC DISCLOSUREGE AppliancesGeneral Electric CompanyLoui

Strany 7

N.D. 2427 REF 06-08NO ICE PRODUCTION/ICE NOT AVAILABLE/NOISY ICEMAKERGE CONFIDENTIAL AND PROPRIETARY INFORMATION–NOT FOR PUBLIC DISCLOSUREGE Appliance

Strany 8 - To Assemble Icemaker:

2. Disassemble the cover with a flat-blade (-) screw-driver and pull it out.3. Disengage the icemaker connector.4. Push hook and pull the icemaker

Strany 9 - 2 Screws

3. Disengage all housing connectors connected with main PCB while maintaining ground.4. Unscrew 2 PCB fixed screws.5. Remove the main PCB while lif